|
New Page 1
|
 |
|
To have
your classified added to this site
please email Mike Mallett at
mikemallett@dirttrackdigest.com.
Please contact Mike if you need your add
removed as well. Classified adds
are automatically removed one year from
their posting date. |
|
|
(1/6/12)
J&J ROLLER
86-40, WINTERS REAR
486, SANDERS FRONT HUBS, TOP/NOSE WINGS,
FULL CONTAINMENT SEAT 15 - 15 1/2,
STEERING, FUEL PUMPS, FUEL LINES,
FILTER, FUEL SAFETANK GAUGES - $4500.00
CALL
518-966-8112 |
|
|
(1/6/12)
1-Complete
Set of RaceSaver Heads. They were run on
an OSW legal 305 engine (Western PA).
They have been milled, to my knowledge I
was told .006-.008" taken off heads due
to an overheating issue. The only
markings not found on the head are the
ones next to the combustion chamber.
They would need to be recertified. They
were on an engine I purchased. I was
told Valves and Springs only have 4
races on them. Asking $700 or best
offer.
Tim Dietz
(717)451-2943 |
|
|
(1/6/12)
Looking to
trade for a 305 Sprint Car
2002
Bicknell Standard Rack/Soft Tail Race
Ready with 602 Crate
The car
has: Profile Steering box, Bert Tranny,
Winters Rear 4.86, ATL Cell, Kirkey Seat
Justin
Henderson, 585-260-3530
 |
|
|
(11/25/11)
Pavement
Sprint Car for Sale-2004 Dowker Chassis.
This car won the 2004 AVSS championship
and has not been raced more than 3 times
a year since! We have owned the car
since 2007 and built our own car, so we
have been using it as a back-up. The
roller comes with Wilwood brakes, ATL 35
gallon cell, Afco shocks, KSE steering
gear, HRP wings, and gauges. Add your
motor, pumps and seat to go racing.
This car would do well with the AVSS,
HOSS and MSR winged series as well as
Spartan Speedway’s wingless series and
the Little 500.
Priced to sell for the 2012 season at
8,500.00
Call Ted @ 231-250-6377 or
teddyalberts@hotmail.com
 |
|
|
(11/08/11)
360 ASCS
Motor
Lightened
Bow-Tie block, ASCS legal heads, Engler
injection, Barnes pump, Carbon Fiber air
box, 18 races since freshened.
$13,000.00 Contact: Lance Yonge
(315)536-8203
or
cwy8203@hotmail.com
 |
|
|
(10/17/11)
For photos
visit:
http://www.jamirussell.com/classifieds.php
New 2011 F5 Twister
Chassis Deluxe kit For Sale!
Brand New 2011 F5 Twister
Chassis Deluxe Kit for Sale!
-Still in plastic on the shipping pallet
brand new!
-New Fiberglass body
-Bumpers and Nerf Bars
-Front axle
-All Aluminum (Torsion arms/Stops,
Radius Rods, Steering Box Mounts-half
and full, bird cages, w-link, motor
plate radius rod mt brackets, ext.)
-Left and Right Safety Bars- left side
built with slip joint
-Seat bars moved back for more leg room
in cockpit
-Car built for slippery forward bite
tracks
-Car Must Go Immediately!
Just Looking to get what I've got into
it... $5,900
Turn Key 305 Racesaver
Sprint Car for Sale!
Turn Key 305 Sprint car for Sale
-New Racesaver 305 Engine with less than
break in time on it
-2004 Beaberbuilt Chassis with most new
tins and body work
-Sanders Front End
-Lee Steering Box
-Half style radiator
-KSE Steering Pump
-Waterman Fuel Pump
-Kirkey Seat
-Autometer Liquid Filled Gauges with
idiot light
-Brand New winters torque tube
-Winters 3 piece rear end with Eagle
Bird Cages and M&W arms
-Saldana 33 Gallon Cell with Brand New
shell
Built for 305 race at Fonda in August
Brand New 305 Racesaver Engine For Sale!
-New Racesaver Heads
-Scat 48# cast crank
-New Hilborn Injection with Stacks and
Filters
-Fresh Vertex Mag just checked at
Magsarus
-New Valve Covers with Cross-over tubes
and breathers
-All brand new, Built for Fonda 8/20/11
-Have spec sheet, receipts, and pictures
of bottom end
Must go- $10,000 as is turn key,
Can be split up and sold as a Rolling
Car as well
2007 F5 Twister Roller
for Sale!
2007 F5 Twister Sprint Car
-Less than 15 races
-Less than 8 races since completely
rebuilt from ground up
-Brand New Winters Hubs on New DMI
Spindles
-DMI torsion and steering arms
-Brand new Radiator
-Autometer Glow in the Dark Guages with
Idiot Light
-KSE Half Box Power Steering with built
in Reservoir
-New Master Cylinder and calipers for
2011
-Brand new steel rotors (Sept 2011)
-DMI torque Ball, housing and torque
tube
-KSE/Waterman P.S./Fuel Pumps
-DMI Bulldog Rear
-All DMI aluminum- pittman arm,
birdcages, arms, stops, radius rods, str
box brackets, shifter, front end
-Brand new AN plumbing throughout for
2011 season
-Fuel Safe 28 Gallon Outlaw Style Fuel
Cell
Car is absolutely a work of art and has
to be seen in person!
Rolling- No Engine, No Pumps - $9,500
Brand New Racesaver 305
Engine For Sale!
-Brand New 305 Racesaver
Engine For Sale!
-New Racesaver Heads
-Scat 48# crank
-New Hilborn Injection with Stacks and
Filters
-Fresh Vertex Mag just checked at
Magsarus
-New Valve Covers with Cross-over tubes
and breathers
-All brand new, Built for Fonda 8/20/11
and didn't race
-Have spec sheet, receipts, and pictures
of bottom end
$5,500 obo
Call Jami @ 518-847-6899 or email @
russellracing27@gmail.com |
|
|
(9/17/11)
I have a almost roller -
complete front axle- winters rear end-
beadlock wheels front and rear. 2006
avenger chassis .Set of body panels,
motor plate, torsion arms, and bars.
Single bearing bird cages and much more
selling as a unit. Please call 201 230
6538 any time, ask for mark or
973-209-4771 |
|
(7/6/11)
PARTS
FOR SALE DOWN SIZING
13
BOTTLES OF VP M1 UPPER END LUBE
110.00 FOR ALL
20
RACE OLD HILBORN 2 3/16
INJECTION,12AS INJECTORS W\FILTERS
AND EXTRA FILTERS AND OUTTER WEAR
COVERS 1000.00
2 SETS
1.5 /1.6 ROCKERS WITH STUD GURDLE
FOR 7/16 STUDS
2006
JEI FRAME AND BODY PARTS FRT
COMPLETE AXLE AND RADIUS RODS,ATL
FUEL CELL,MOTOR PLATES
RADIATOR,MASTER CYLINDER,STEERING
MOUNT WITH SHUT OFF, IMPACT
BELTS,TORQUE BALL,W LINK,BRAKE &
GAS PEDEL & 2007 SPARE CHASSIS
{REAR IS BENT}WITH EXTRA BODY
PANELS 2500.00 FOR ALL
15"
STEERING WHEEL 25.00
2
STEERING WHEEL QUICK RELEASE HUBS
25.00 EACH
USED
TIRES 20.00 EACH
305
BLOCK 200.00
2
MANUAL WING SLIDERS 1 NEW 1 LIKE
NEW 35.00 EACH
2004
J&J RAISED RAIL NEW FRT RACK AND
SOME BODY PANELS GREAT STARTER CAR
1000.00
REAR
END BREATHER\ FILLER CAN 20.00
RONS 0
FUEL PUMP FRESH HAS TAG FROM
REBUILD 175.00
7 MISC
FRONT ARMS L&R`S 25.00 ALL
MISC
TORSION STOPS STEEL & ALUM 10.00
EACH
3 PRO
LR SHOCK SPRINGS NO RUBBERS 10.00
ALL
3
TORQUE BALL HOUSINGS 35.00 EACH
CALL
518-762-2548
ASK
FOR LEE OR KORY
LEAVE
MESSAGE WILL CALL YOU BACK
|
|
|
(6/14/11)
Anyone have
a car they would like to rent for the
CRSA show at penn can friday night? If
so contact Bill Bailey at 607 235 6924
or
webmotorsports@yahoo.com I am
considering a return to sprints in the
305 division and want to make sure it's
the road I want to travel. Bill has run
successfully with the ESS and Patriot
divisions. |
|
|
(4/12/11)
Needed: 305 race-saver bottom end. Bobby
Sandt Jr blew up engine & we need
another one to get back on the track. If
anybody has one please contact me as
soon as possible. We have two weeks
until our next race & hope to get back
out there.
E-mail -
forgottenpunk91@aol.com
Phone - 4848955820 |
|
(4/4/11)
FRESH Krimes Racing Engines
286-2 All-Pro motor with
Engler 2.900” injection, NEW
titanium valves, Jesel
rockers, Barnes 4 stage oil
pump, Brodix block .015 over,
new pistons, Crower L.W. 3.800
crank, 6.000” Dyer rods, NEW
Mahle Pistons, MSD ignition
with box, NEW custom camshaft,
aluminum oil pan, KSE front
cover and water pump, Summers
Brothers gear drive, Saldana
oil tank, Waterman fuel pump.
$19,500 obo.
This motor is currently
getting rebuilt and will be
complete within 3 weeks.
Contact Danny Dietrich
717-752-6798
|
|
|
(3/21/11)
2007 Maxim
Big Max 86/40 RR frame, body and motor
plate for sale. Chassis has 20 races on
it. Was bought for a spare and I never
put it together. Body is in great shape
and it has new powder coating. Call or
email Tim with questions 609-932-8591 or
th239@yahoo.com. Asking $1,300
obo. Thanks.

28 Gal. Outlaw style fuel tank and
bladder complete. Great condition and no
leaks. Call or email Tim with questions
609-932-8591 or
th239@yahoo.com. Asking $725 obo.
 |
|
|
(3/8/11)
40/87 Big
Max Maxim chassis with left and right
side body panels.
40/86 Maxim Chasis, needs front clip
10 AFCO small body shocks $40 each
set of Eagle birdcages $225.
Jaycox racing at 518/827-5726,
518/231-8550 |
|
|
(2/20/11)
2003 Maxim
39/87 raised rail clean freshly painted
chassis. Not raced in 4 or 5 years.
Complete car ready to roll put in your
engine and go. Full enclosure kirkey
seat, Frankland rear, KSE power
steering , pump -0 fuel pump ,new
radiator and hoses ,pro shocks ,both
wings, all body panels, bumpers bars
etc. Spare parts and pieces. Series
has moved to far from us and car needs
to go. $5000.00 518 692 7246 (Tim)
|
|
|
(1/26/11)
305 Race Saver Sprint Package
What you get:
Premium Package:
CNC Machined 2 pc Seal 305 Block, With
American Made Splayed 4 Bolt Main Caps,
ARP Main Stud Kit, 4340 Fully Balanced
Rotating Assembly, Mahle Forged Flat Top
Pistons With Rings File Fit, King Rod
And Main Bearings, 1 Pair Of Racer Heads
$3,999.95
Economy Package:
CNC Machined 2 pc Seal 305 Block, With
American Made Splayed 4 Bolt Main Caps,
ARP Main Stud Kit, Cast Steel Fully
Balanced Rotating Assembly, Mahle Forged
Flat Top Pistons With Rings File Fit,
Speed Pro Rod And Main Bearings, 1 Pair
Of Racer Heads
$3,599.95
Note: Get $100.00
Dollars Back If You Provide A good Std.
Core
Rogers Performance
- 215-674-5240 |
|
(1/26/11)
For
sale, 3 external top wings, ok
condition very usable and where used
last year. $50, 3- big board front
wings, used very usable carried as
spares.$25. Winters Rear axil tubes
Where used last year then switched
to wide rear end. $30. 2- 6 pin
beadlock front wheels with tires
very usable $25. 360 headers
schonfield from speedway motors
usable (right side might be bent up)
$50. trade from late model parts
Located in canastota ny
Scott
Davis
757-773-5910
|
|
(1/20/11)
3 - DMI
Rear Ends for sale, 4:12, Black
thermal coating Option, Swivel
Spline Option, Lightweight Axle
Option, Only 10 Races on ea since
new. Paid $2000.00 ea w/ options
sell for $1000 ea
5 - Sets
of Birdcages for sale
3 - Sets
of MPD
1 - Set
of Winters with Angular Contact
bearings
1 - Set
of DMI with extra set of new
bearings included
$200 per
set + shipping
(845)
594-6731
|
|
(1/12/11)
3- 52"
front axles- $100 each
Wanted-
RaceSaver Heads, 2 3/16 hilborn
injection
Contact
Jami Russell
|
|
|
(12/21/10)
Used Torsion
Bars DMI, Chalk Stix, MPD many rates $10
Used Afco Shocks 6/2, 5, 4/7, 4RT $70
Used Pro Shocks 4/6, 6, 4 $70 Used Afco
Benic Gas Shocks 5 and 4 $100 Kirkey
Full Containment Seat 15" w/ Impact
Belts $600 MPD LR wheel 15x15x7 IBL $225
Used Steel and Aluminum Brake Rotors $15
New Steering Box Mounts $10 Outlaw
Inboard Caliper $75 Used tires RR and LR
many different compunds all in real good
shape $25 Contact Matt Tanner at
mtracing90@hotmail.com 518 488 8512 |
|
(12/2/10)
07
triple xxx roller--less than 20
races--race ready--winters rear-fuel
safe tank--weld wheels--afco
shocks--with wings car is completely
plumbed--put motor in and
go--$4500--
Race
ready 305 motor--complete injectors
to pan--with headers and fuel
pump--$5000 or B/O
Complete
front axle--$300 or b/o
other
small stuff
will make a package deal
contact
Jim McCaffrey
518-766-0008
|
|
|
(11/20/10)
For sale
this 45' low mileage unique motohome /
hauler Kenworth long chassis has a
pre-computer 475 Cat connected to a
Fuller 10 speed tranny driving a bagged
twin screw rear end with only 61K
origianl miles. Serviced every 3K miles
and always stored in a heated garage.
Has a renovated 16' bunkhouse, sleeping
3-4 comfortably, a dinette, a
kitchenette with new fridge and
microwave. There is Corian counters, a
stainless steel sink and Grohe faucet.
The half bath has a new cabinet with a
stainless steel sink in a Corian top
and a Grohe faucet. Lots of storage and
comfort. The 22'5" garage has a new 6000
LB lift, a 9000 LB winch, Lights top and
lower sides, and new aluminum diamond
plate floor. The remote operated beaver
tail ramp has two 8' extension ramps.
This rig has been built for the long
haul. Asking a very fair $145,000. New
rigs on this type chassis are going for
over $300K. Remember low miles and
pre-computer Cat. Hard to find! Go to
www.nostalgialighting.com/bigbird for
pictures and more info or call me
207-233-3665 or e-mail me. |
|
| |
|
 |
|